Leaking Roof Repair Oklahoma City – Fast, Expert Fixes
Most roof leaks in Oklahoma City don’t start in the middle of the shingles they start at the weak points: chimneys, skylights, walls, valleys, and edges. Those areas are protected by flashing—thin pieces of metal designed to keep water out. When flashing is missing, reused, or installed wrong, water sneaks behind the roof system and causes leaks, rot, and interior damage.
We see it all across the metro: chimney leaks in Nichols Hills, missing kickouts in Yukon, skylight leaks in Edmond, and rotted fascia from missing drip edge in Moore. In fact, improper flashing is one of the most common (and preventable) causes of roof failure after Oklahoma’s hail and wind storms.
At Patriot Roofing, we specialize in diagnosing and repairing flashing issues the right way. Every project starts with a free inspection, complete with photo documentation that shows exactly where water is getting in and why. Then we give you a clear, itemized estimate for a permanent, code-compliant repair, whether that means replacing chimney step flashing, cutting new counter flashing into brick, installing factory Velux skylight kits, or adding drip edge to stop water from wicking under shingles.
As a
veteran-owned company with
400+ five-star Google reviews and an
A+ BBB rating, we don’t do band-aid fixes. We do durable, warrantied repairs that protect your home long-term.
Where Flashing Fails (and Why It Leaks)
Chimneys: Missing or reused step flashing, no counter flashing, or cracked mortar joints.
Sidewalls/Headwalls: Sealant used instead of step flashing, or shingles run tight to siding.
Kickout Flashing: Often missing, allowing water to run behind stucco or siding.
Skylights: Reused flashing, undersized curbs, or non-factory kits that fail under storms.
Valleys & Ridges: Damaged or rusted valley metal, nail pops, or underlayment gaps.
Drip Edge: Missing or poorly installed, allowing water to wick under shingles, rot decking, or damage fascia and soffits.
In Oklahoma City, hail, rain and wind frequently loosen flashing, leading to leaks months later if not caught early.
Our Flashing Repair & Replacement Process
1. Free Inspection & Photos – Roof and attic review to confirm water entry points.
2. Root-Cause Report – Images and explanations of the exact failure.
3. Temporary Protection – Sealant or tarping if there’s active leakage.
4. Code-Compliant Repair – Install new step and counter flashing, kickouts, drip edge, skylight factory kits, and proper underlayment as needed.
5. Final Test & Warranty – Walkthrough, cleanup, photo confirmation, and warranty paperwork.
What Does Flashing Repair Cost in Oklahoma City?
Typical ranges (depending on access and scope):
Pipe or small wall flashing tune-up: $450–$850
Drip edge replacement (per eave section): $450–$750
Sidewall step flashing section (with kickout): $550–$1250
Chimney re-flash (step + counter, mortar cut): $950–$1,900+
Skylight re-flash (factory Velux kit integration): $850–$1,500+
Valley metal replacement (partial): $900–$2,000+
Every estimate comes with photos and itemized details so you know exactly what you’re paying for.
Insurance or Out-of-Pocket?
Storm damage (hail or wind loosening flashing) is usually covered
Age or improper installation typically is not.
We prepare insurance-ready photo reports and coordinate with your adjuster when appropriate
If damage extends beyond flashing, we’ll explain when repair makes sense vs. full replacement.
FAQs – Flashing Repair in Oklahoma City
Do you re-use existing flashing?
No. Reuse is a leading cause of repeat leaks. We install new, code-compliant flashing every time.
Do you replace drip edge flashing?
Yes. We install new drip edge at eaves and rakes to prevent water intrusion and meet Oklahoma building code.
Can you add kickout flashing after the roof is installed?
Yes. We carefully cut it in at the eave/sidewall transition to protect siding and walls.
Do you repair skylight leaks?
Yes. We use factory Velux flashing kits and correct curb heights to eliminate leaks.
Will chimney re-flashing damage my brickwork?
No. We make clean mortar cuts, tuck counter flashing, and seal to spec for watertight protection.
How fast can you complete a flashing repair?
Many repairs are done same or next day. Emergency tarping is available if water is actively entering.
Helping OKC Homeowners Stop Flashing Leaks for Good
From Nichols Hills chimneys to Edmond skylights and Yukon drip edge replacements, Patriot Roofing has repaired thousands of flashing failures across the metro. Homeowners trust us because we provide photo evidence, clear options, and factory-spec installations—not quick caulk jobs that fail after the next storm.
With 400+ five-star reviews and an A+ BBB rating, our veteran-owned team stands behind every repair with workmanship warranties.
Ready to Stop a Flashing Leak? – Get a Free Inspection
1. Book your free flashing inspection – We’ll check chimneys, skylights, sidewalls, drip edge, and valleys.
2. Review your photo report – See exactly where the leak starts and your repair options.
3.
Protect your home – Choose a permanent, code-compliant fix backed by warranties.
Service Areas
Central OKC: Nichols Hills, The Village, Quail Creek
North: Edmond, Tulsa, Gaillardia, Oak Tree
South: Moore, Norman, Newcastle
East: Midwest City, Choctaw, Jones
West: Yukon, Mustang, Bethany, Piedmont
Contact Information
Phone:
Our Roof Repair services ____________